Home > Buy Products > LM Technologies > Bluetooth v4.1 low energy Module with IPEX - LM930

Bluetooth v4.1 low energy Module with IPEX - LM930

LM930 is a Bluetooth low energy module that runs its own host stack under the Bluetooth v4.1 specification.


Features

  • Over-the Air Upgrade (OTAU) available
  • Firmware development support
  • IoT Applications Available (e.g: Cloud Sensor & Cloud Connector, Eddystone Beacon™, Serial Over GATT)
  • Fully integrated module with no additional components required
  • Small footprint

Bluetooth v4.1 low energy module with IPEX – LM930

The LM930 Bluetooth® low energy module is designed for use within embedded systems.

It is implemented as a peripheral device within a product, while saving the developer valuable PCB space.

The LM930 enables wireless communication with other nearby Bluetooth® low energy devices (e.g. iOS and Android) using a highly power efficient connection. The transmission output power ranges from 0 dBm to 9 dBm and can be configured to provide an extended battery life or a longer communication range.

This single core standalone module combines a Bluetooth low energy radio using a Bluetooth v4.1 stack, plus a microcontroller with 512 kB EEPROM for running the application. The LM930 incorporates 27 pin outs including UART and I2C for interfacing with a wide range of peripheral devices like sensors. It’s SMT side and bottom pads allow for easy manufacture and placement into your product.

Application firmware and configuration settings can be preloaded to the module before supply. LM offer bespoke integration into your product by supporting your developer. We can also assist in the development of new IoT applications for the module. IoT applications such as Serial over GATT, iBeacon™ and Key Fob (with RGB LED Controller) are available with the module’s LM53X development kits.  The firmware is customisable to meet your requirements.

Bluetooth v4.1 low energy module with IPEX – LM930

The IPEX connector provides the developer with the flexibility to add an antenna that suits the products unique requirements, such as dipole, IC or PCB antenna types. The selected antenna can be placed anywhere on the product, which is useful for avoiding any metallic surfaces of the product housing and a noisy environment of the product’s PCB.

Depending on the antenna used a longer range, omnidirectional or unidirectional RF signal is produced.


 

MY CART
You have: 0 items
Cart Sub-Total: $0.00
ADD TO CART
Part No: LM930
Please call toll free 866-345-3667, email orders@lemosint.com
or Request a RFQ, to inquire about volume discounts


DATA SHEET
Site by Delgar.net