Home > Buy Products > Antennas > Antenna Details

Antennas

 

P.M.R. MAGNETIC MOUNT (Part Number: CABMAGKIT)

Frequency
PolarityVERTICAL
Gain0db
VSWRSELF TUNED
DimensionsHeight: WITH WHIP 550mm    
CableN/A
Connector
Power40 WATTS
Impedance50 OHM

Magnetic base, lightweight hi-strength. 4 rare earth magnets moulded over a non-scratch base. Extremely popular for inexpensive taxi mount for VHF and UHF radios...
 
 

P.M.R. MAGNETIC MOUNT (Part Number: MAXMAGKIT)

Frequency
Polarity
Gain0db
VSWRSELF TUNE - CUT WHIP TO FREQUENCY
DimensionsHeight: 550mm WITH WHIP    
Cable5.00 metres of RG58CU
Connector
Power40 WATTS
Impedance50 OHM

Magnetic mount kit complete suitable for VHF and UHF radio. Single hi-strength rare earth magnet encased in rubber mould with 1/4 wave whip fitted...
 
 

MAGNETIC MOBILE MOUNT (Part Number: MMMLB)

FrequencyVHF,LOW BAND,
PolarityVERTICAL
Gain0db
VSWRSELF TUNE - CUT WHIP TO FREQUENCY
DimensionsHeight: WITH BASE COIL AND WHIP 500 MM    
Cable5.00 metres of RG174
Connector
Power25 WATTS
Impedance50 OHM


HIGH STRENGTH MINARET MAGNETIC MAG MOUNT FITTED WITH ENCLOSED WOUND BASE COIL ENABLING USE OF A SHORT WHIP FOR LOW BAND FREQUENCIES 66 88 MHZ
 
 

P.M.R. MAGNETIC BASES (Part Number: PROMAGHAL)

Hi strength magnetic base, with 6 rare earth magnets fully overmoulded to prevent scratching paint surface. Removeable repair lead (MAGHAL) fully waterproof. Suitable for fitment of hinge adaptor (HAL) also used for long low band whips.

Frequency
Polarity
Gain
VSWR
DimensionsHeight: 44mm TO HAL FOOT    
Cable5.00 metres of RG58CU ( REMOVABLE LEAD )
Connector
Power40 WATTS
Impedance50 OHM

Hi strength magnetic base, with 6 rare earth magnets fully overmoulded to prevent scratching paint surface. Removeable repair lead (MAGHAL) fully waterproof. Suitable for fitment of hinge adaptor (HAL) also used for long low band whips.
 
 

P.M.R. MAGNETIC BASES (Part Number: PROMAG6MM)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Rubber overmoulded hi-strength magnetic mount 70mm diameter for 6ML (no plug)
 
 

MOBILE MOUNT ADAPTOR (Part Number: 6ML)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Screw on whip lug (ferrule) antenna whip to 6mm thread either in black or chrome. Suitble for CABMAG6MM.
 
 

MOBILE ANTENNA BODY MOUNT (Part Number: BCC)

Frequency
Polarity
Gain
VSWR
Dimensions
Cable5.00 metres of RG58CU
Connector
Power35 WATTS
Impedance50 OHM


Moulded feeder boot clip mount, suitable to accept hinge adaptor(HAL). Fitted to vehicle boot lids. Cable supplied but no hinge.
 
 

MOBILE ANTENNA BODY MOUNT (Part Number: FCB)

Frequency
Polarity
Gain
VSWR
DimensionsHeight: 19MM    
Cable5.00 metres of RG58CU
Connector
Power35 WATTS
Impedance50 OHM


Fully molded feeder entry cable body mount antenna, suitable to accept hinge adaptor (HAL) drill hole 12.5mm suitable for mounting on vehicle bodies or any other outdoor applications.
 
 

MOBILE ANTENNA BODY MOUNT (Part Number: FCB6MM)

Frequency
Polarity
Gain
VSWR
DimensionsHeight: 25MM    
Cable5.00 metres of RG58CU
Connector
Power35 WATTS
Impedance50 OHM


Fully molded feeder entry cable body mount antenna. Suitable to accept whip to 6mm thread adaptor (6ML) popular for 1/4 wave whips for VHF,UHF,GSM. Used on vehicls and other outdoor applications.
 
 

MOBILE ANTENNA (Part Number: GQHB)

FrequencyHI-BAND,
PolarityVERTICAL
GainOdb
VSWR1.5 to 1
DimensionsHeight: 1.5mm    Width: Base size 48 MMx 48 MM    
Cable5.00 metres of RG58CU
ConnectorMINI UHF CONNECTOR ON INSIDE BASE
Power25 WATTS
Impedance50 OHM


Glass mount antenna VHf or UHF 1/4 wave with fine tuning facility used for vehicles that the body work can't be drilled. Removable whip. Available in VHF HB (170MHz), UHF version available (GQUHF)
 
 

MOBILE MOUNT ADAPTOR (Part Number: HALB)

Frequency
Polarityv
Gain
VSWRv
DimensionsHeight: 27mm    
CableN/A
Connector
Powerv
Impedance


Hinge adaptor(HAL) Chrome, makes hinge base for P.M.R. Mounts either for (FCB) feeder cable body mount or promaghal (PROMAG hinge type). Also fits mag repair lead.
 
 

LOADING COIL ANTENNA (Part Number: HBEBLACK)

FrequencyVHF,
PolarityVERTICAL
Gain3db
VSWR1.5 to 1
DimensionsHeight: 112 MM    
CableN/A
Connector
Power35 WATTS
Impedance


Loading coil. VHF 156-180 MHz. 5/8 wave enclosed coil in black. Base fits directly onto hinge adaptor (HAL). Top accepts whip.
 
 

MOBILE LOW PROFILE ANTENNA (Part Number: LOWPROUHF)

FrequencyVHF,
PolarityVERTICAL OR HORIZONTAL
GainUNITY
VSWR1.2 to 1
DimensionsHeight: 34 mm    Width: 106mm    Length: 348mm
Cable5.00 metres of RG58CU
ConnectorAS SPECIFIED
Power40 WATTS
Impedance50 OHM


Low profile UHF antenna suitable for high roof vehicles or fixed covert station use. Does not require ground plane. Also availabe in VHF frequencies. Fully waterproof.
 
 

MOBILE MOUNT ADAPTOR (Part Number: LUGB)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Lug or ferrule whip to hinge (HAL) whip adaptor. One side fits into hinge the other takes the antenna whip. Black.
 
 

MOBILE MOUNT ADAPTOR (Part Number: LUGQB)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Split hinge to fit HAL black or chrome. Useful for screwing antenna whip from hinge. Quick and easy for car wash or security etc.
 
 

MOBILE ANTENNA (Part Number: TRU)

FrequencyVHF,HI-BAND,
PolarityVERTICAL
Gain3db
VSWR1.5 to 1
DimensionsHeight: 500mm    
Cable5.00 metres of RG58CU
ConnectorNOT SPECIFIED
Power35 WATTS
Impedance50 OHM


HB ground plant independent 1/2 wave body mount antenna + cable (no plug). Used for fibreglass vehicle roofs.
 
 

MOBILE ANTENNA (Part Number: UHFBL)

FrequencyUHF,
PolarityVERTICAL
Gain3db
VSWR1.5 to 1
DimensionsLength: SELF TUNE 480mm
CableN/A
Connector
Power35 WATTS
Impedance


Base loaded whip antenna for UHF frequencies (410 - 480 MHz). 6mm female threaded base with thread to lug adaptor fitted, enabling removal of antenna for car washing (if option required).
 
 

MOBILE ANTENNA ENCLOSED BASE COIL (Part Number: VHF2LB)

PolarityVERTICAL
Gain0db
VSWRSELF TUNE - CUT WHIP TO FREQUENCY
DimensionsHeight: BASE PLUS WHIP 500mm ( UNCUT )    
Cable5.00 metres of RG58CU
ConnectorNOT SPECIFIED
Power35 WATTS
Impedance50 OHM

Minature enclosed base coil plus whip for low band. VHF 66-88 MHz. Base 6mm female thread supplied, also with 6mm male / 4mm adaptor to fit minaret magnet (MMM)...
 
 

WHIP (Part Number: PW24)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 24 Inches    
CableN/A
Connector0
Power0
Impedance0


Parallel whip, 24" self colour
 
 

WHIP (Part Number: PW24B)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 24 Inches    
CableN/A
Connector0
Power0
Impedance0


Parallel whip 24" Black
 
 

WHIP (Part Number: PW42)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 42 Inches    
CableN/A
Connector0
Power0
Impedance0


Parallel whip 42" self colour
 
 

WHIP (Part Number: PW42B)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 42 Inches    
CableN/A
Connector0
Power0
Impedance0


Parallel whip 42" Black
 
 

WHIP (Part Number: PW51)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 51"    
CableN/A
Connector0
Power0


Parallel whip 51
 
 

WHIP (Part Number: PW48B)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 48 Inches    
CableN/A
Connector0
Power0
Impedance0


Parallel whip 48" Black
 
 

WHIP (Part Number: TW51)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 51 Inches    
CableN/A
Connector0
Power0
Impedance0


Tapered whip 51" self colour
 
 

WHIP (Part Number: TW51B)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 51 Inches    
CableN/A
Connector0
Power0
Impedance0


Tapered whip 51" black
 
 

WHIP (Part Number: FWHIP)

Frequency
Polarity0
Gain0
VSWR0
Dimensions
CableN/A
Connector0
Power0
Impedance0


Flexible plastic coated whip with 6mm lug
 
 

TIPS (Part Number: TIPP)

Frequency
Polarity0
Gain0
VSWR0
Dimensions
CableN/A
Connector0
Power0
Impedance0


Tip for parallel whip
 
 

LOADING COIL ANTENNA (Part Number: HBECHROME)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 500mm    
CableN/A
Connector0
Power0
Impedance0


Loading coil antenna without hinge adaptor HB. 156-180 MHz 5/8 wave enclosed coil. Chrome.
 
 

WHIP (Part Number: MEMWHIP)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 500mm    
CableN/A
Connector0
Power0
Impedance0


Memory wire Ni-Ti alloy whip for minaret. 1.8mm diameter * 500mm
 
 

WHIP (Part Number: MMMWhiplug)

Frequency
Polarity0
Gain0
VSWR0
Dimensions
CableN/A
Connector0
Power0
Impedance0


Flexible 1/4 wave whip used for minarets applicaions.
 
 

METAL FOOT SHIELDED ANTENNA MOUNT (Part Number: FCBM6MM)

Frequency
Polarity0
Gain0
VSWR0
Dimensions
Cable5.00 metres of RG58
Connector0
Power0
Impedance0


Metal foot shielded antenna mount, suitable for 6mm (lug).
 
 

Long Reach Mount (Part Number: LRM)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Long reach mount (no plug
 
 

Repair Lead (Part Number: MAGLHAL)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Magnet repair moulded lead for HAL adapter type
 
 

TIPS (Part Number: TIPT)

Frequency
Polarity0
Gain0
VSWR0
Dimensions
CableN/A
Connector0
Power0
Impedance0


Tip for tapered whip
 
 

WHIP (Part Number: PW48)

Frequency
Polarity0
Gain0
VSWR0
DimensionsHeight: 48 Inches    
CableN/A
Connector0
Power0
Impedance0


Parallel whip 48" self colour
 
 

MOBILE MOUNT ADAPTOR (Part Number: LUGC)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Lug or ferrule whip to hinge (HAL) whip adaptor. One side fits into hinge the other takes the antenna whip. Chrome.
 
 

MOBILE MOUNT ADAPTOR (Part Number: HALC)

Frequency
Polarity
Gain
VSWR
DimensionsHeight: 27mm    
CableN/A
Connector
Power
Impedance


Hinge adaptor(HAL) Black, makes hinge base for P.M.R. Mounts either for (FCB) feeder cable body mount or promaghal (PROMAG hinge type). Also fits mag repair lead.
 
 

MAG MOUNTS (Part Number: TURBOMAGHAL)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Large base mag for LB whip tuning for HAL 92mm diameter (no plug)
 
 

MAG MOUNTS (Part Number: TURBOMAG6MM)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Large base mag for LB whip tuning for 6ML 92mm diameter (no plug)
 
 

MAG MOUNTS (Part Number: CABMAGHAL)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Rubber overmoulded hi-strength magnetic mount. 60mm diameter for HAL (no plug)
 
 

MAG MOUNTS (Part Number: CABMAG6MM)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Rubber overmoulded hi-strength magnetic mount. 60mm diameter for 6ML (no plug)
 
 

Repair Lead (Part Number: MAGL6MM)

Frequency
Polarity
Gain
VSWR
Dimensions
CableN/A
Connector
Power
Impedance


Magnet repair lead for 6mm thread lug (6ML) type
 
 

MOBILE ANTENNA (Part Number: GQUHF)

FrequencyUHF,
PolarityVERTICAL
Gain
VSWR
Dimensions
Cable5.00 metres of RG58CU
Connector
Power
Impedance


Glass mount antenna VHf or UHF 1/4 wave with fine tuning facility used for vehicles that the body work can't be drilled. Removable whip. VHF HB version also available (GQHB)
 
 

TIPS (Part Number: SAFETIP)

Frequency
Polarity0
Gain0
VSWR0
DimensionsLength: 16mm
CableN/A
Connector0
Power0
Impedance0


Safety tip moulded on pear shape. Different colours available. Used where there is a possibility of danger from unprotected antenna whip end.
 
MY CART
You have: 0 items
Cart Sub-Total: $0.00
Site by Delgar.net