8 bit Address - 8 bit Data encoder/decoder: CTA88

8 bit Address - 8 bit Data encoder/decoder
Part Number: CTA88


  • Operating voltage (temperature):
  • 4.0V-5.5V for standard version (-40°C to +125°C)
  • 2.0V-5.5V for low voltage version (-40°C to +85°C) 
  • Draws <2mA without external load 
  • 8 bit address and 8 bit data 
  • .256 different remotes with 8 controls each 
  • Single packetised transmission for fast activation 
  • Maximum usuage of the range capability of an RF module 
  • Adequate preamble to settle data slicer in the receiver 
  • Extra wake up preamble to allow for transmitter power up time requirements 
  • Differential Manchester encoding of address, data and checksum 
  • Synchronisation codes and checksum to reduce false triggering on noise 
  • Suitable to be used with Narrow Band FM radio modules 
  • Ceramic resonator or crystal oscillator up to 20MHz 
  • Data rate up to 5.6kbps 
  • Minimum external component requirement 
  • Serial operation allow a PC to send or receive CTA88 command bursts 
  • Decoder timeout 
  • Up to 8 encoder/decoder modes including push button, delayed and continuous TX modes. 
  • Wireless Security and Alarm systems 
  • Emergency assistance call system 
  • Status reporting and monitoring systems 
  • RF Remote control systems 
  • Industrial controls 
  • HVAC controls 
  • Simple On/Off switching 
  • Long range telecontrol with narrow band FM radios 


You have: 0 items
Cart Sub-Total: $0.00
Part No: CTA88
Please call toll free 866-345-3667, email orders@lemosint.com
or Request a RFQ, to inquire about volume discounts

Site by Delgar.net