433 / 868MHz FM Data Transceiver, BiM3G : BiM3G
The BIM2/3G data radio module is a PLL synthesiser based miniature PCB mounting UHF radio transceiver which enable the simple implementation of a wireless data link at up to 128 kbps at distances up to 75 metres in-building and 300 metres open ground. Features - Designed for compliance with EN 300 220-3 (radio) and EN 301 489-3 (EMC) standards
- Data rates up to 128 kbps
- Usable range up to 300 m
- Versions available on 433.92MHz, 434.42MHz and 868MHz band
- Fully screened
- Low profile with small footprint
Technical Summary - Crystal-locked PLL, FM modulated at up to 128 Kbps
- +10dBm on 433.92MHz and 868MHz (Dependent on version)
- High efficiency, >30%, DC to RF
- 2nd harmonic, > -60dBc
- Single conversion FM superhet receiver
- SAW front end filter gives >50dB image rejection
- Sensitivity: -102dBm sensitivity @ 1ppm BER, 64kbps version
- -108dBm sensitivity @ 1ppm BER, 15kbps version
TBA dBm sensitivity @ 1ppm BER, 128kbps version - RSSI output with 60dB range
- Extremely low LO leakage, -125dBm typical
- Supply: +5V (± 10%)
- Size: 33 x 23 x 5mm
Applications - PDAs, organisers and laptops
- Handheld terminals
- EPOS equipment, barcode scanners, belt clip printers
- Data loggers
- Audience response systems
- In-building environmental monitoring and control
- Security and fire alarms
- Restaurant ordering systems
- Vehicle data up/download
|
