New Products

PAT-HPA21G Ultra-Wideband Amplifier

The Lemos PAT-HPA21G is high performance, low noise, ultra-wideband amplifier. Based on GaN technology, the amplifier achieving high reliability and high efficiency. Most Most power amplifiers are divided into sub bands that cover

Details

 

PW1-928 RF Data Transceiver Module

The PW1-928 RF transceiver module is designed for reliable bi-directional transfer of digital data over distances of over 300 feet in cluttered urban environments (over half a mile in true line of sight). Operating in the 902 to 928MHz frequency band, the module generates a nominal +7dBm into a 50-ohm load and achieves an outstanding RX sensitivity of –112dBm.

Details

UHF Narrow Band FM Multi channel Transceiver – TR2I/TR2M

The TR2M transceiver module offers a low power, reliable data link in an industry-standard pin out and footprint. This makes the TR2M ideally suited to those low power applications where existing wideband modules have insufficient range, or where multi-channel operation is needed.
Two versions are available, covering the 458.5-459.1MHz UK band (at 100mW) and the European 433.05-434.79MHz band (at 10mW)

Details

WiFi and Bluetooth USB Module 4.0 Dual Mode Class 1 – LM811

The Smart Ready LM811 WiFi Bluetooth HCI Combination Module fully supports functional compliance of IEEE 802.11 b/g/n, Bluetooth Classic + EDR v2.1, v3.0, v4.0 and Low Energy over 4.0 standards.
The LM811 uses Realtek’s 8723 BU platform, which enables the 811-0461 HCI Module to be compatible with the latest Android platform, Linux Kernel v4.3.6 and Android4.4_V2.19.

Details

NTX2B - UHF Narrow Band FM Transmitter

Available for licence-exempt operation in the 433MHz (EU) and 458MHz (UK) bands, the NTX2B module combine effective screening with internal filtering to minimise spurious radiation and susceptibility thereby ensuring EMC compliance.

 

Details

MTX2 - UHF Narrow Band FM sub-miniature transmitter

The MTX2 transmitter module adds a totally new sub-miniature form factor to the existing range of Radiometrix ISM band devices. Using cutting edge integrated RF devices, it offers multi channel, low power narrowband operation in a previously unobtainable size.

Details




SFX2 - 500mW NBFM Multi-channel UHF Transceiver

The SFX2 transceiver module offers a 500mW RF power output in the UK 458MHz band. This makes the SFX2 ideally suited to those low power applications where existing multi-channel narrow band devices like TR2M have insufficient range.

Details




UHF FM Code-Hopping Receiver Module -KRX2

KRX2 is a small PCB mounting UHF integrated receiver-decoder module that is ready-to-use with our UHF FM code-hopping transmitters for secure wireless remote control and keyless security systems.

Details




UHF FM Code-Hopping Receiver Module -KRX2

The KFX2 is a UHF code hopping 5 button keyfob transmitter for use with the matching KDEC decoder or KRX-416-000-DIL decoder IC to provide a remote controlled link in excess of 100 metres over.

Details




UHF FM Code-Hopping Data Transmitter-KTX2

The KTX2 is a miniature PCB mounting code-hopping UHF radio transmitter suitable for use in secure remote keyless control applications at distances up to 75 metres in-building or 300 metres open ground.

Details




LMX-ISM-242

Lemos International has launched a new line of affordable low-power 2.4GHz radios. The LMX-ISM-242 series of 2.4GHz data radios are available in DIP and SMD configurations. A long range version, the LMX-ISM-242-LR is also available.

Details




Parani-BCD Series, Embedded Bluetooth Class 1 and Class 2 OEM SMD/DIP Modules

The Parani-BCD series offers a low power embedded Bluetooth Class 1 and Bluetooth Class 2 OEM SMD/DIP module combining antenna for OEM manufactures who want to implement Bluetooth Class1 and Class 2 functionality with their products cost effectively and also in timely manner.

Details

 

GPS Disciplined OCXO Module Type GPS1300-10-1000 with NMEA Data Stream

10.000MHz high precision GPS disciplined Oven Controlled Crystal Oscillator module type GPS1300-10-1000 measuring only (40 x 32.5 x 10.5)mm.

This oscillator has evolved from the former successful military design and will revolutionize the attainment of extreme precision timing signals for use in commercial applications. The accuracy is derived from the loop control discipline of a precision OCXO through the acquisition of of satellite GPS data providing near Caesium accuracy approaching 10-12, one thousandth part per billion, and at a fraction of the cost.

Details

SAT3 869MHz Narrow Band

The SAT3 transmitter modules offer a 10mW RF output UHF data link in Radiometrix SIL standard pin-out and footprint. This makes the SAT3 ideally suited to low power applications using narrow band transmitters. Together with the matching SAR3 receiver a one-way radio data link can be achieved over a distance up to 1km+ with suitable choice of data rate and antennas.

Frequency:

869.2125MHz

Details

CLX2 19200 baud Modem

The CLX2 is a 19,200baud half-duplex serial radio modem module operating on licence-exempt European 433.05-434.79MHz SRD band. CLX2 is an intermediate level OEM radio modem which is in between a raw FSK radio module like BiM2G and a sophisticated OEM radio modem like RPM2A. It takes care of preamble, frame synchronisation and error checking.

Frequency:

433.92MHz & custom frequencies

Details

BiM2G / BiM3G 433 / 868MHz FM Data

The BIM2/3G data radio module is a PLL synthesiser based miniature PCB mounting UHF radio transceiver which enable the simple implementation of a wireless data link at up to 128 kbps at distances up to 75 metres in-building and 300 metres open ground.

Frequency:

433.92MHz, 434.42MHz, 868.30MHz & 869.85MHz

Details

WFX2 500mW High power, Fast, 458MHz

The WFX2 is a high power, fast-switching, multi-channel narrowband FM transceiver, offering 500mW RF power output on the UK 458MHz license-free Industrial/ Commercial Telemetry and Tele-command band. Capable of achieving a range of over 5km, the WFX2 also features very fast (5msec) rx-to-tx switching time.

Frequency:

458.525-459.1MHz (UK) & custom frequencies

Details

SENA ZigBee OEM Modules - ProBee-ZE10

The ProBee-ZE10 is an all-in-one ZigBee OEM module with integrated ZigBee core and radio/antenna circuits together with high level software library so OEM manufacturers can easily and cost effectively integrate ZigBee functionality into target products in timely manner.

The ZE10 OEM module is designed to meet specific requirements of low cost and low power wireless applications such as home automation and smart energy by adopting the ZigBee technology. The ZE10 is based on the Ember EM250 ZigBee core and certified by ZigBee alliance based on ZigBee 2007 and ZigBee Pro standard.

Despite of its low cost and low power consumptions, the ZE10 provides high performance and robust data transfer capability for wide range of applications. The ZE10 can transfer data at up to 250 kbps and reach up to 1.6 km (1 miles) outdoor line-of-sight.

Details

SENA ZigBee OEM Modules - ProBee-ZE20S

The ProBee-ZE20S is short range ZigBee OEM SMD/DIP module with integrated ZigBee core and radio/antenna circuits together with high level software interface so that OEM manufacturers can easily and cost effectively integrate ZigBee functionality into their target products in timely manner.

The ZE20S OEM module is designed to meet specific requirements of low cost and low power wireless applications such as Home Automation,Smart Energy, Health care, Building Automation and Telecom Services by adopting the ZigBee technology. The ZE20S is based on the Ember EM357 ZigBee core certified by the ZigBee alliance based on ZigBee 2007 and ZigBee Pro stack.

Despite of its cost effective and low power consumptions, the ZE20S provides high performance and robust data transfer capability for wide range of applications. The ZE20S can transfer data at up to 250 kbps and reach up to 150m outdoor line-ofsight with default antenna.

Details


Site by Delgar.net