Home > Buy Products > SENA ZigBee Modules > ProBee ZE10C-00 ZigBee OEM Module w/ Chip Antenna.
You have: 0 items
Cart Sub-Total: $0.00
Part No: ZE10C-00
Price: $21.99 each
Please call toll free 866-345-3667, email orders@lemosint.com
or Request a RFQ, to inquire about volume discounts


ZigBee Modules - ProBee ZE10C-00 ZigBee OEM Module w/ Chip Antenna.


The ProBee-ZE10 is an all-in-one ZigBee OEM module with integrated ZigBee core and radio/antenna circuits together with high level software library so OEM manufacturers can easily and cost ..

  • Fully supports Zigbee®/Zigbee Pro 2007 wireless connectivity
  • Integrated 2.4GHz, IEEE 802.15.4-compliant coprocessor
  • Various antenna options according to users' requirement, up to 1.6km with optional 5 dBi dipole antenna
  • Transmit Power: +20dBm E.I.R.P (max.)
  • Receiver Sensitivity: -102dBm @1% BER
  • TX Current: 190mA @3.3V (max.)
  • RX Current: 45mA @3.3V (max.)
  • Sleep Current: ≤ 2uA
  • Full UART Signals Support: UART_TXD/RXD, RTS/CTS, DTR/DSR
  • 4 Analog Inputs, 13 Digital Inputs/Outputs
  • Supports various self management features wirelessly such as firmware upgrade and system configuration by using modem AT command set
  • Easy to use Windows configuration tool available


RF Characteristics
  • Frequency Band: 2.4 GHz
  • Interface Immunity: DSSS
  • Transmit Power: +20dBm E.I.R.P (max.)
  • Receiver Sensitivity: -102dBm @1% BER
  • RF Data Rate: 250 kbps
  • Working Distance: Up to 1.6km using 5 dBi dipole antenna
  • Various Antenna/Connector Options: Dipole 1/3/5dBi, U.FL, Chip
  • Channels: 14
  • Channel Spacing: 5 MHz
ZigBee Network
  • Network topology: Mesh
  • Stack profile: ZigBee / ZigBee Pro 2007
  • Network addressing: Channel, PAN ID, EPID
ZigBee Data Transmission
  • Unicasting
  • Multicasting
  • Broadcasting
  • Many-to-One Communication
  • Enhanced Reliability based on data retransmission
ZigBee Security
  • Network Layer security with one Trust Center for efficient operation
  • 128 bit AES encryption algorithms
  • Strong, NIST-approved security
  • Serial Data Interface: 1 UART
  • Serial Data Rate: 1 Mbps
  • ADC: 4 Inputs
  • 13 Digital Inputs/Outputs
Device Management and Configuration
  • Configuration Method: AT Commands, ProBee Manager
  • Remote Configuration
  • Remote Firmware Upgrade using both Cloning and Pass-thru methods
  • Supports rich neighborhood device scanning and monitoring using AT commands
Power Requirements
  • Supply Voltage: 2.7~3.6 VDC
  • TX Current: 190mA @3.3V (max.)
  • RX Current: 45mA @3.3V (max.)
  • Sleep Current: ≤ 2uA
Physical Properties and Others
  • Pin: 2.0mm Pin Header 14 x 2
  • Size : 51.7 mm x 23.0 mm x 11.15 mm (2.03 in x 0.90 in x 0.43 in)
  • Operating Temperature: -40˚C to 85˚C
CertificationFCC, CE, TELEC, KCC
Certification ID NumberZIG10006PRV38490-24
Warranty3-year limited warranty


New Telegesis R309 AT Command Interface Release


The new R309 release is built off the longstanding and stable platform of R308 but introduces over 35 new features

Learn More »
Site by Delgar.net