Home > Buy Products > SENA ZigBee Modules > ProBee ZE20SDU ZigBee DIP type w/ U.FL connector
MY CART
You have: 0 items
Cart Sub-Total: $0.00
ADD TO CART
Part No: ZE20SDU-00
Price: $16.75 each
Please call toll free 866-345-3667, email orders@lemosint.com
or Request a RFQ, to inquire about volume discounts


Qty:
DOWNLOADS

ZigBee Modules - ProBee ZE20SDU ZigBee DIP type w/ U.FL connector


 

The ProBee-ZE20S is short range ZigBee OEM SMD/DIP module with integrated ZigBee core and radio/antenna circuits together with high level software interface so that OEM manufacturers can easily and cost effectively integrate ZigBee functionality into their target products in timely manner.

* Orders over 100 modules please request a quote

ProBee ZE20SDU ZigBee SMD type w/ chip antenna.

The ProBee-ZE20S is short range ZigBee OEM SMD/DIP module with integrated ZigBee core and radio/antenna circuits together with high level software interface so that OEM manufacturers can easily and cost effectively integrate ZigBee functionality into their target products in timely manner.

The ProBee-ZE20S is short range ZigBee OEM SMD/DIP module with integrated ZigBee core and radio/antenna circuits together with high level software interface so that OEM manufacturers can easily and cost effectively integrate ZigBee functionality into their target products in timely manner.

The ZE20S OEM module is designed to meet specific requirements of low cost and low power wireless applications such as Home Automation,Smart Energy, Health care, Building Automation and Telecom Services by adopting the ZigBee technology. The ZE20S is based on the Ember EM357 ZigBee core certified by the ZigBee alliance based on ZigBee 2007 and ZigBee Pro stack.

Despite of its cost effective and low power consumptions, the ZE20S provides high performance and robust data transfer capability for wide range of applications. The ZE20S can transfer data at up to 250 kbps and reach up to 150m outdoor line-ofsight with default antenna.

Features:

  • Supports ZigBee 2007/ ZigBee Pro Stack
  • Integrated 2.4GHz, IEEE 802.15.4-2003 compliant coprocessor
  • Short range ZigBee OEM SMD/DIP module
  • Supports up to 150m with default antenna
  • UART Signals Support
  • 6 Analog Inputs, 17 Digital Inputs/Outputs
  • Supports remote management features wirelessly such as firmware upgrade and system configuration by using modem AT command set
  • Easy to use Windows configuration tool available
ProBee-ZE20S
RF Characteristics
  • Based on Ember EM357
  • Interface Immunity: DSSS
  • Transmit Power: +8dBm (Max.)
  • Receiver Sensitivity: Typ. -100dBm/ Max. -102dBm
  • RF Data Rate: 250 kbps
  • Working Distance: Up to 150m with default antenna
  • Various Antenna/Connector Options: Dipole 1/3/5dBi, U.FL, RPSMA, Chip
  • Channels: 16
  • Channel Spacing: 5 MHz
ZigBee Network
  • Network topology: Mesh, Star and Tree
  • Stack profile: ZigBee 2007/ZigBee Pro
  • Network addressing: Channel, PAN ID, EPID
ZigBee Data Transmission
  • Unicasting
  • Multicasting
  • Broadcasting
  • Many-to-One Communication
  • Enhanced Reliability based on data retransmission
ZigBee Security
  • Network Layer security with one Trust Center for efficient operation
  • 128 bit AES encryption algorithms
  • Strong, NIST-approved security
Interfaces
  • Serial Data Interface: 1 UART
  • Serial Data Rate: 1 Mbps
  • ADC: 6 Inputs
  • 17 Digital Inputs/Outputs
Device Management and Configuration
  • Configuration Method: AT Commands, ProBee Manager
  • Remote Configuration
  • Remote Firmware Upgrade using Pass-thru method
  • Supports rich neighborhood device scanning and monitoring using AT commands
Power Requirements
  • Supply Voltage: 2.1~3.6 VDC
  • TX Current: 33mA/Max.45mA (Boost)
  • RX Current: 28mA/Max.31mA (Boost)
  • Sleep Current: <1uA@25˚C
Physical Properties and Others
  • SMD type: 33 pin, half-thought hole, 2mn pitch
  • DIP type: 26 pin, 2 mm pitch-pin Header, 13x2
  • SMD type Size: 31.6 x 18.6
  • DIP type Size: 32.8 x 21.0
  • Operating Temperature: -40˚C to 85˚C
Certification FCC, CE, TELEC, KCC
Warranty 3-year limited warranty

Optional Accessories

Part Number Description
SAT-G01R 1dBi Stub Antenna, RP-SMA Plug, Right-hand thread
DAT-G01R 3dBi Dipole Antenna, RP-SMA Plug, Right-hand Thread
DAT5-G01R 5dBi Dipole Antenna, RP-SMA Plug, Right-hand Thread
SEC-G01R 15cm RPSMA Antenna Extension Cable, Right-hand Thread
UEC-G01R RP-SMA to U.FL cable (15cm)

 

NEW R309 RELEASE
New Telegesis R309 AT Command Interface Release

AXSEM

The new R309 release is built off the longstanding and stable platform of R308 but introduces over 35 new features

Learn More »
Site by Delgar.net